[cisco-voip] CallManager's 8.5 Intercom with PLAR

[Nate VanMaren]

If you're doing real Intercom and not DNs with auto answer, you don't need a CSS/Partition per pair, you get the speed dial on the intercom.  You can do departmental partitions, with the auto generated CSSs, then people who need plar put the destination on the intercom.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (AM)
Sent: Monday, October 24, 2011 12:57 PM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] CallManager's 8.5 Intercom with PLAR


Large customer has 40 office each with maybe a thousand people, the first office I setup Intercom they wanted a lot of 1-1 Intercom with PLAR, this meant a lot of CSS/PTs to support this.

Is there a better way for 1-1 plar paging with CallManager 8.5 ?

Can't run multicast, wondering if I should be looking at SingleWire or something else, as I don't see a workaround and wonder if we will hit a CSS/PT limitation with Intercom.  This is also a large amount of programming/work.



 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111024/3531b73d/attachment.html>