[cisco-voip] Cisco ATA187 CUCM 7.1.3

[Paul]

says on the product page...

The Cisco ATA 187 Analog Telephone Adaptor 
supports Session Initiation Protocol (SIP) and requires Unified 
Communications Manager or Unified Communications Manager Business 
Edition System Release 7.1(5) or later. 


time to patch!



________________________________
From: James Dust <james.dust at charles-stanley.co.uk>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: Wednesday, September 7, 2011 9:04 AM
Subject: [cisco-voip] Cisco ATA187 CUCM 7.1.3



Can anyone tell me if ATA 187’s will work with CUCM 7.1.3?

I cannot see or add the device within CUCM.

Do I possibly need to load a device pack?

Regards

James
Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip