[cisco-voip] Cisco ATA187 CUCM 7.1.3

[Vogel, Doug]

I believe 7.1.5 is the minimum supported release.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roark, Todd
Sent: Wednesday, September 07, 2011 12:11 PM
To: James Dust; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco ATA187 CUCM 7.1.3

You have to install a set of new device drivers.

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/187/1_0/english/release/notes/atarn903.html


Todd Roark
________________________________
From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net]<mailto:[mailto:cisco-voip-bounces at puck.nether.net]> On Behalf Of James Dust
Sent: Wednesday, September 07, 2011 10:05 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Cisco ATA187 CUCM 7.1.3

Can anyone tell me if ATA 187's will work with CUCM 7.1.3?

I cannot see or add the device within CUCM.

Do I possibly need to load a device pack?

Regards

James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110907/2e675eb3/attachment.html>