[cisco-voip] C200M2 Raid Re-build

Russell Chaseling rchaseling at plannet21.ie
Fri Sep 9 13:37:40 EDT 2011


Cheers,

Will do....not too confident though as this is the second replacement drive. So another question can I remove all the drives out of this server and place them in another exact model UCS C200M2 server? Both have default raid configured as shipped from Cisco direct

Cheers

From: Chris Ward (chrward) [mailto:chrward at cisco.com]
Sent: 09 September 2011 18:07
To: Russell Chaseling; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] C200M2 Raid Re-build

Depending on the RAID type, size, and IO of the array it could take longer (than 2 hours). I would give it until at least tonight to see if there is a status change before assuming the worst.

+Chris
Hosted Collaboration Solution TME

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Russell Chaseling
Sent: Friday, September 09, 2011 1:01 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] C200M2 Raid Re-build

Hey,

Anyone ever replaced a 1TB SAS drive on a UCS C200M2?

CIMC & vSphere shows the status of the drive  as "rebuild" but doesn't give a percentage completed. Has been going for 2 hours now.........

Cheers
Russell


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110909/2fc1600c/attachment.html>


More information about the cisco-voip mailing list