[cisco-voip] C200M2 Raid Re-build

[Chris Ward (chrward)]

I don't believe this will work. The drives are given specific IDs by the
RAID controller. Putting anyone of those drives into a different system
would result in that new system seeing a new drive rather than using it
as an existing drive.

 

+Chris

Hosted Collaboration Solution TME

 

From: Russell Chaseling [mailto:rchaseling at plannet21.ie] 
Sent: Friday, September 09, 2011 1:38 PM
To: Chris Ward (chrward); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] C200M2 Raid Re-build

 

Cheers,

 

Will do....not too confident though as this is the second replacement
drive. So another question can I remove all the drives out of this
server and place them in another exact model UCS C200M2 server? Both
have default raid configured as shipped from Cisco direct

 

Cheers

 

From: Chris Ward (chrward) [mailto:chrward at cisco.com] 
Sent: 09 September 2011 18:07
To: Russell Chaseling; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] C200M2 Raid Re-build

 

Depending on the RAID type, size, and IO of the array it could take
longer (than 2 hours). I would give it until at least tonight to see if
there is a status change before assuming the worst.

 

+Chris

Hosted Collaboration Solution TME

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Russell
Chaseling
Sent: Friday, September 09, 2011 1:01 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] C200M2 Raid Re-build

 

Hey,

 

Anyone ever replaced a 1TB SAS drive on a UCS C200M2?

 

CIMC & vSphere shows the status of the drive  as "rebuild" but doesn't
give a percentage completed. Has been going for 2 hours now.........

 

Cheers

Russell

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110912/78927fe5/attachment.html>