[cisco-voip] CBWFQ over PPPoE over L2TP

[Owen]

It should be applied to the physical interface that the PPP uses, be it
Ethernet, DSL or whatever.

Owen.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joseph Mays
Sent: Saturday, 10 September 2011 5:46 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CBWFQ over PPPoE over L2TP

Okay, next up. We have a number an ATM connection running L2TP to Bell South
in order to provide DSL lines through the Bell South network.

I've applied the policy maps to all the router interfaces on the path from
the AS5400's (incoming voice trunks) to the gateway router with the
connection to Bell South. All the interfaces show the policy maps active and
"doing stuff" except for the virtual interfaces, which show no policy map
active.

When I add --

"service policy output queue-on-dscp" to the virtual template for the DSL
connections, I get the following message for each active virtual interface
--

"Class Based Weighted Fair Queueing will be applied only to the
Virtual-Access interfaces associated with an MLP bundle"

If I "show policy-map"on the virtual interfaces they don't show the policy
map.

So how do I make the service policy active for the virtual interfaces (which
are created by the following template):

interface Virtual-Template1
 description Bellsouth ADSL PPPoE template  ip unnumbered Loopback100  ip
verify unicast reverse-path  ip route-cache flow  no peer default ip address
ppp max-bad-auth 4  ppp mtu adaptive  ppp authentication chap pap  ppp chap
hostname winnet-kydsl-1  service-policy output queue-on-dscp

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip