[cisco-voip] Providing voice services for Microsoft Lync

[Jobe Gates]

I set this up in lab with a CME.  Here's the link I used to get started.

http://www.matt-j.co.uk/2011/05/27/step-by-step-lync-2010-enterprise-voice-with-cisco-call-manager-express-or-uc500-part-1/

Thanks,
Jobe


On Wed, Sep 14, 2011 at 1:09 PM, Matt Slaga (AM) <
matt.slaga at dimensiondata.com> wrote:

> You would configure the UC520 with SIP dial peers to the Lync server, and
> add a gateway in the Lync server Topology Builder.  If you are using a
> single box for Lync and mediation, you may need to add a second NIC or at
> least a second IP address that you can pin 5060 to.  Otherwise, it will try
> to use 5066/5068 for SIP traffic.****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Drew Weaver
> *Sent:* Wednesday, September 14, 2011 12:31 PM
> *To:* 'cisco-voip at puck.nether.net'
> *Subject:* [cisco-voip] Providing voice services for Microsoft Lync****
>
> ** **
>
> ** **
>
> Hello everyone, as a little pet project I have been playing around with
> Microsoft Lync, I have finally gotten everything to work as far as instant
> messaging and outlook integration and all of that happy stuff now I am
> turning my attention to getting the telephony portions to work.****
>
> ** **
>
> I would like to use our Cisco UC520 as a gateway for calls in/out of Lync,
> does anyone have any notes or experiences they would like to share with
> getting this to work or any caveats or anything that will save time?****
>
> ** **
>
> thanks,****
>
> -Drew****
>
> ** **
>
> ** **
>
>
>
> itevomcid ****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110914/99fc0e52/attachment.html>