[cisco-voip] Cisco SPA 500 requires password to Reset

[Matthew Loraditch]

SPA500s are supposed to only work on UC5x0 series



Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive

Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] on behalf of Mac GroupStudy [mac.groupstudy at gmail.com]
Sent: Monday, September 26, 2011 9:41 PM
To: shary shary
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco SPA 500 requires password to Reset

Unfortunately I don't have an answer for you but I do have another question: Were these SPA phones not meant to be used on a full blown CUCM deployment? In otherwords, was it just meant for CUCMBE or maybe even UCME?

On Fri, Sep 16, 2011 at 6:53 AM, shary shary <shaary1 at hotmail.com<mailto:shaary1 at hotmail.com>> wrote:
hi folks, i am trying to reset one of cisco spa 500 phone but whien i reset it to factory defualt it asks for Password and i don;t have the password for this phone. Any help .
thanks in advance

Regards,
Sheeraz Saeed lodhi.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110927/6c2313bc/attachment.html>