[cisco-voip] Auto Mute when Dialed

[Buchanan, James]

You could do that with MWI. Basically, create a special line on the Security phone. Then, create a translation pattern that the speed dial points to. That translation pattern would translate to the MWI On number, and the calling number would be set as the number of the special line on the Security phone. When security sees that the light is on, then they would know. Of course, that blip that places the call might be too long a blip.

James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:jbuchanan at presidio.com>
D: 615-866-5729 | F:615-866-5781  www.presidio.com<http://www.presidio.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Haas, Neal
Sent: Wednesday, September 28, 2011 9:46 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Auto Mute when Dialed

I need to have a phone in an interview room that "in case of emergency" a button is pushed an auto dial goes out and security is notified to go to "booth 1" BUT they don't want the person at the Booth to hear that a call was placed.

Is there a way to create a Speed Dial and turn the Speaker off?

Neal Haas

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110928/1a7cbf05/attachment.html>