[cisco-voip] (no subject)

[Buchanan, James]

Hello,

I used one of these once for additional FXO ports. You have to configure it as a third-party SIP device. Furthermore, make sure you setup a user for it with SIP digest credentials to put into the configuration of the SPA.

Thanks,

James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:jbuchanan at presidio.com>
D: 615-866-5729 | F:615-866-5781  www.presidio.com<http://www.presidio.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of navid yazdani
Sent: Wednesday, April 18, 2012 5:12 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] (no subject)

hello
I have a spa3102 ,pstn line,cucm and i want to putting the spa3102 as a gateway for cucm to connect ip phones to pstn.i guess i must use sip trunk between ucm and spa3102 but i do not now what should i do?
can every body help me please
This message w/attachments (message) is intended solely for the use of the intended recipient and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments.  Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120418/d9608c50/attachment.html>