[cisco-voip] Manual configuration Cisco 7931

[Matthew Saskin]

You can absolutely use SRST to register both SIP and SCCP phones in the
event of a WAN failure.

On Thu, Apr 19, 2012 at 7:56 PM, Dario Quiroz <mail at darioquiroz.com> wrote:

> We have a with few phones using SIP and SCCP connected to a CUCME router,
> and this connected to a CUCM over a WAN link. All the phones are registered
> with the CUCM
> The problem is when the wan fails. We need to maintain the communication
> between the phones.
> We think to use srst, but some phones are sip and other are sccp, so it's
> impossible to do that.
> There is a 7931 phone with two lines. Is possible to register one line
> into the CUCME and the second line into the CUCM???
> Because is the only phone that needs to call over the wan, the other only
> make calls locally.
>
>
> phones(sccp and sip) --------------- router(CUCME)
> -----------------------wan link-------------------CUCM-----------pstn
>
>
>
> Thanks in advance!!
>
>
> On Thu, Apr 19, 2012 at 7:20 PM, Dario Quiroz <mail at darioquiroz.com>wrote:
>
>> It's possible to manual configure a 7931 cisco phone?
>> We have a CUCM and CUCME, and we need to register one line into CUCM and
>> the other into CUCME. Is this possible??
>> Thanks in advance!!
>>
>> --
>> -------------------------------------------
>>          Dario Quiroz
>>    mail @ darioquiroz . com
>>         +55-71-9275-9080
>> -------------------------------------------
>>
>>
>
>
> --
> -------------------------------------------
>          Dario Quiroz
>    mail @ darioquiroz . com
>         +55-71-9275-9080
> -------------------------------------------
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120420/04356786/attachment.html>