[cisco-voip] PRIs using MGCP

[Erick Wellnitz]

It's only supposed to be for troubleshooting but look at 'change b-channel
maintenance status' in CallManager service parameters

On Fri, Apr 20, 2012 at 12:34 PM, Tim <bcchimp at gmail.com> wrote:

>  I'm using quite a few PRIs via MGCP to CUCM.  I'm wondering if there's a
> way to busy up the PRI channels so that they'll start using the other PRIs
> on the other router.  Trying to reload one of my routers, but can't stop
> the inbound calls from coming in on the certain PRIs.  I was thinking it's
> possible, but maybe not.****
>
> ** **
>
> Thanks,****
>
> Tim****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120420/50964364/attachment.html>