[cisco-voip] PVDMs, DSP farms, et al.... next steps?

[Lelio Fulgenzi]

Hi all, 

I'm in the process of migrating from 6608s to 3945s. I've got all the pieces and I'm just wondering about next steps. 

I've found the following documents: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/media.pdf 

http://www.cisco.com/en/US/docs/ios-xml/ios/voice/cminterop/configuration/15-1mt/vc-enh-confr-vgr.pdf 

But I'm wondering if there are any others people can recommend. 

Also, if there are any hints or recommendations on going forward, that too would help. 

I'll have two 3945s, each with a PVDM-256 installed that I need to use for 8 T1s into each router, and for conferencing mainly. But I'll also want to try and do some transcoding if possible. 

Thanks, Lelio 




--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120424/80422a1c/attachment.html>