[cisco-voip] Configuration ESXi on UCS

Nicholas Samios nsamios at staff.iinet.net.au
Sat Aug 11 06:59:21 EDT 2012


I've just configured a pair C210 - main things in ESXi you need to do are disable LRO and align datastore partitions by essentially deleting and re-adding the stores in ESXi

Long as you use the OVA templates no need to worry about VM specs

http://docwiki.cisco.com/wiki/Implementing_Virtualization_Deployments

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers_chapter_00.html

I also took the liberty of updating the boot order (demoting NICs an disabling PXE boot)


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Reto Gassmann
Sent: Friday, 10 August 2012 10:31 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Configuration ESXi on UCS

Hello Group

is there a document available that describes all the settings for ESXi that UC works without problem on UCS.
One thing that I found is disable LRO on UCS.
Are there other settings???

Thanks for help
Reto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120811/c6456db1/attachment.html>


More information about the cisco-voip mailing list