[cisco-voip] Configuration ESXi on UCS

[Lelio Fulgenzi]

That's a great link Nicholas, thanks. 

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Aug 11, 2012, at 6:59 AM, Nicholas Samios <nsamios at staff.iinet.net.au> wrote:

> I’ve just configured a pair C210 – main things in ESXi you need to do are disable LRO and align datastore partitions by essentially deleting and re-adding the stores in ESXi
>  
> Long as you use the OVA templates no need to worry about VM specs
>  
> http://docwiki.cisco.com/wiki/Implementing_Virtualization_Deployments
>  
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers_chapter_00.html
>  
> I also took the liberty of updating the boot order (demoting NICs an disabling PXE boot)
>  
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Reto Gassmann
> Sent: Friday, 10 August 2012 10:31 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Configuration ESXi on UCS
>  
> Hello Group
>  
> is there a document available that describes all the settings for ESXi that UC works without problem on UCS.
> One thing that I found is disable LRO on UCS.
> Are there other settings???
>  
> Thanks for help
> Reto
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120811/3fa6ae49/attachment.html>