[cisco-voip] PRI Wont Register!!

[Lelio Fulgenzi]

are you using a T1 crossover cable? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Edward Countryman" <Edward.Countryman at provena.org> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, August 15, 2012 12:09:14 PM 
Subject: [cisco-voip] PRI Wont Register!! 




Im on a jobsite installing new 2951 with two port VWIC2-2mft-t1 being used to connect via PRI to an existing Nortel CS1000 



The gateway shows as registered to CCM and both PRI’s have “multiple frames established” but the PRI’s show as UNKNOWN in the CCM admin pages. 



No errors on the PRI connections, CCM is configured as network and the switch type is DMS100. 



I am stumped, any ideas from anyone???? 



(Going to open TAC case but that may be hours) 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120815/f0a4beb5/attachment.html>