[cisco-voip] Migrating from C200 blades to HP

[Chris Ward (chrward)]

Why would you want to rebuild it? Can't you just shut them down on the UCS and boot them on the HP? Probably take an hour or two to move the data but then you don't need to re-install/re-configure anything.

+Chris
Unity Connection TME

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Hobson
Sent: Thursday, August 16, 2012 2:56 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Migrating from C200 blades to HP

All,

I have a customer who i am looking to migrate off the C blade into a HP blade solution and had a couple of questions:


1.       They maybe running Business Edition 6000 which as i understand it is the full UCM just limited by the platform it is on at the moment.  So i believe as long as the ip and password between the cluster is the same this can be backed up and restored on the new VM?

2.       How would i go about migrating the licenses over as obviously these will be different Virtual Machines sat on a different platform?

Cheers

Kev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120816/c5885034/attachment.html>