[cisco-voip] Migrating from C200 blades to HP

[Lelio Fulgenzi]

Do you need vMotion to do this or is that just for keeping them live during the move?

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Aug 16, 2012, at 1:01 PM, "Chris Ward (chrward)" <chrward at cisco.com> wrote:

> Why would you want to rebuild it? Can’t you just shut them down on the UCS and boot them on the HP? Probably take an hour or two to move the data but then you don’t need to re-install/re-configure anything.
>  
> +Chris
> Unity Connection TME
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Hobson
> Sent: Thursday, August 16, 2012 2:56 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Migrating from C200 blades to HP
>  
> All,
>  
> I have a customer who i am looking to migrate off the C blade into a HP blade solution and had a couple of questions:
>  
> 1.       They maybe running Business Edition 6000 which as i understand it is the full UCM just limited by the platform it is on at the moment.  So i believe as long as the ip and password between the cluster is the  same this can be backed up and restored on the new VM?
> 2.       How would i go about migrating the licenses over as obviously these will be different Virtual Machines sat on a different platform?
>  
> Cheers
>  
> Kev
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120816/30034116/attachment.html>