[cisco-voip] Routing outbound calls conditionally based on the call source

[Ted Nugent]

Not exactly what you;re asking but probably much easier and will work...
create a new CSS that points to another set of RP->RL with the E1 ordered
first. Assign that CSS to those phones.

On Sun, Aug 19, 2012 at 12:52 PM, Isamar Maia <isamar at gmail.com> wrote:

> Hi Folks,
>
> We have here the following scenario on CUCM.
>
> All users are dialing out through one group which has a GSM and TDM
> gateway included, and both
> gateways are connected using SIP.
>
> If GSM connection fails, calls go through E1 gateway. It's working OK now.
>
> Problem: Some users don't want to go through GSM gateway since it
> doesn't have CallerID set.
>
> So, we need to set these users to go directly to the E1 gateway.
>
> Which are the options to the set that on CUCM conditionally based on
> the call's source ?
>
>
> --
> Isamar Maia
> Cel. VIVO SSA:  (55) 71-9146-8575
> Cel. TIM SSA: (55) 71-9185-5264
> Fixo:  (55) 71-4062-8688
> 日本: +81-(0)3-4550-1212
> Skype ID: isamar.maia
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120819/a6035c1f/attachment.html>