[cisco-voip] Routing outbound calls conditionally based on the call source

[Lelio Fulgenzi]

This is the way I would accomplish this task as well. It's not ideal, but fairly easy (not necessarily quick though) to implement. 

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Aug 19, 2012, at 3:52 PM, Ted Nugent <tednugent73 at gmail.com> wrote:

> Not exactly what you;re asking but probably much easier and will work... create a new CSS that points to another set of RP->RL with the E1 ordered first. Assign that CSS to those phones.
> 
> On Sun, Aug 19, 2012 at 12:52 PM, Isamar Maia <isamar at gmail.com> wrote:
> Hi Folks,
> 
> We have here the following scenario on CUCM.
> 
> All users are dialing out through one group which has a GSM and TDM
> gateway included, and both
> gateways are connected using SIP.
> 
> If GSM connection fails, calls go through E1 gateway. It's working OK now.
> 
> Problem: Some users don't want to go through GSM gateway since it
> doesn't have CallerID set.
> 
> So, we need to set these users to go directly to the E1 gateway.
> 
> Which are the options to the set that on CUCM conditionally based on
> the call's source ?
> 
> 
> --
> Isamar Maia
> Cel. VIVO SSA:  (55) 71-9146-8575
> Cel. TIM SSA: (55) 71-9185-5264
> Fixo:  (55) 71-4062-8688
> 日本: +81-(0)3-4550-1212
> Skype ID: isamar.maia
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120819/b249c88b/attachment.html>