[cisco-voip] CallManager Device > Gateway H323 > Called Party Transformation

[Ted Nugent]

I've been looking into this as well and I don't think thats right... I
initially thought the same thing but from what I was reading
transformations are unidirectional and translations on the patterns are
still displayed on the phone display for outbound calls. Mark Snow did a
nice writeup on this on his blog, I may have misread and I need to lab it
to completely understand but as I recall that was the theory.... Not sure
which writeup it was (1-3) that he covered it. Ya it's old but still a good
read if you haven't.

http://blog.ine.com/2009/12/07/building-global-dial-plans-in-cucm7-part-i-globalization/

On Mon, Aug 20, 2012 at 10:21 PM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

> Updating the phone display for Called Party (eg I dial 9,383-1111 and want
> the display to show To 383-1111). The phone display can be manipulated by
> the Called Party Transformation applied to H323 gateway right? Not just the
> route/patten/route list details.****
>
> ** **
>
> ** **
>
> See Figure 11.25****
>
> http://www.ciscopress.com/articles/article.asp?p=1745737&seqNum=8****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120820/f05e3861/attachment.html>