[cisco-voip] CUCM6.1.4 Upgrade to 8.6.X on New Hardware

[bertacco.alessandro@alice.it]

Thank you very much Abebe.

Regards.

Inviato da HTC

Alessandro Bertacco

----- Reply message -----
Da: "Abebe Amare" <abucho at gmail.com>
A: "Alice Borgo" <bertacco.alessandro at alice.it>
Cc: "cisco voip" <cisco-voip at puck.nether.net>
Oggetto: [cisco-voip] CUCM6.1.4 Upgrade to 8.6.X on New Hardware
Data: mer, dic 5, 2012 12:40
you can install the subscriber directly on new hardware it will replicated the DB from the publisher.

regards,

Abebe


On Wed, Dec 5, 2012 at 2:26 PM, Alice Borgo <bertacco.alessandro at alice.it> wrote:


 Hi guys,

   I need to Upgrade PUB + ONe SUB from 6.1.4 to 8.6.X on new MCS Hardware. 

Customer want upgrade without modification on the actual Cluster, so I can't upgrade in place the cucm 6.1.4. 

 So using VMware infrastructure i made an exact copy of the 6.1.4 customer cluster.

 Using Disaster Recovery export all PUB configuration from the Production Cluster and imported on the VMware copy.

 Afeter that I'll proceed with the upgrade step 6.1.4 -> 7.1.5.33900-10 -> RefreshUpgrade -> 8.6.1.2000-1 on the Virtualized environment 

 After that Using again DisasterRecovery export DB of the virtualized PUB and the Import again in the MCS Hardware PUB.

 Question for you! 

Need to make the same for the SUB, or is possible to install the SUB directly on the MCS Hardware without all the upgrade step ? 

Thank you very much Regards

 Alessandro Bertacco
_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121205/6b50255f/attachment.html>