[cisco-voip] Sip and Early Offer

[Kenneth Hayes]

Also I would make sure you have the g729r8 in your codec and dspfarm..I run
into this issue with CUBE.

Sent from my iPhone

On Dec 12, 2012, at 6:04 PM, Jake Rybak <jrybak at gmail.com> wrote:

Assuming you are dialing from CUCM and destination is an IVR:
SIP Profile-->SIP Rel1xx Options=Send PRACK for all 1xx Messages

Apply to trunk.


On Wed, Dec 12, 2012 at 11:48 AM, Carlo <carlo_calabrese2006 at yahoo.com>wrote:

> I have a sip to a PRI with early offer forced set on the gateway, but when
> I call an 800 number, I don't get the message, it just starts ringing. is
> there something else I need to set.
> The number I am trying to call is IBM at 800-426-7378
>
> Thanks
>
> Sent from my iPad
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121212/978dafd6/attachment.html>