[cisco-voip] Sip and Early Offer

[Carlo]

You two hit it on the head. I added to the SIP profile and BOOM, it started working.

That saved me a TAC call 

Thanks


Sent from my iPad

On Dec 12, 2012, at 3:42 PM, Kenneth Hayes <kennethwhayes at gmail.com> wrote:

> Also I would make sure you have the g729r8 in your codec and dspfarm..I run into this issue with CUBE.
> 
> Sent from my iPhone
> 
> On Dec 12, 2012, at 6:04 PM, Jake Rybak <jrybak at gmail.com> wrote:
> 
>> Assuming you are dialing from CUCM and destination is an IVR:
>> SIP Profile-->SIP Rel1xx Options=Send PRACK for all 1xx Messages
>> 
>> Apply to trunk.
>> 
>> 
>> On Wed, Dec 12, 2012 at 11:48 AM, Carlo <carlo_calabrese2006 at yahoo.com> wrote:
>> I have a sip to a PRI with early offer forced set on the gateway, but when I call an 800 number, I don't get the message, it just starts ringing. is there something else I need to set.
>> The number I am trying to call is IBM at 800-426-7378
>> 
>> Thanks
>> 
>> Sent from my iPad
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121212/b4bf4dcb/attachment.html>