[cisco-voip] Corporate Directory - host not found - Reach out to the Puck

Gregory Wenzel gwenzel at conres.com
Thu Feb 2 14:59:21 EST 2012


8.6.2-20000-2

 

 

After the firmware upgrade the corporate directory and personal dir
disappeared so that makes sence its https. I will do the capture. The
url thing sounds like that's what I am missing. I did change the name to
ip address upon the first install.

 

Greg Wenzel

Solutions Engineer

 

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Thursday, February 02, 2012 2:52 PM
To: Gregory Wenzel
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Corporate Directory - host not found - Reach
out to the Puck

 

What version of CUCM?

 

Starting in 8.x all URL's are https.  This requires ITL on phone in sync
with ITL on server. Phone contacts TVS on server to verify certificate
trust.  

 

Is the phone attempting to access the HTTPS port? (packet capture)

Does the web server respond with syn-ack? (packet capture)

is SSL negotiation successful? ( packet capture and TVS logs)

 

 

/wes

 

On Feb 2, 2012, at 2:05 PM, Gregory Wenzel wrote:





 

Weird stuff on my home lab. My 7945, 7970 and 7961G-GE phones all show
Corporate Directory as host not found ... and I have WEB enabled for the
phones, but cannot web into them http://ip>phone.addr/
<http://ip%3ephone.addr/> 

 

Unity Connection is not running and Due to cpu and avail memory I can
only run 1xCUCM/1xUCCX Premium/1xWin2003Svr/1xWinXp workstation for CAD
and ip communicator testing.

 

Not using DNS and there is no domain Config on cucm.

No LDAP integration

I reset/restarted tomcat in Serviceability

I reset/restarted TVS in Serviceability

Have device pool, dialplan and other essentials set up on cucm so my
UCCX lab can function.

Even rebooted the publisher

In OS admin is regenerated the TVR certs

In command line I ran "Show itl" and TVS certs are registered and in
sync

The URL for Directory services is in the enterprise services section

I have no firewall between the router that's the dhcp server and the
phones

I do have a win2003 server acting as my smtp, dns, domain server but
cucm is not using dns

The phones work, they have a local

2811 is the Dhcp server

The phones communicate, the scripts I am writing do work with the
phones.

I removed the secure URLs from the enterprise services section as
suggested from some of the blogs on CCO Communities.

My 7945, 7970 and 7961G-GE phones all show Corporate Directory as host
not found

I do have routing turned on in my 2811 vgw. The phones see my publisher
as the primary tftp server

I have looked over and over through all the blogs and searched Cisco and
I think I covered just about everything.

 

This is NFR branded software:

System version: 8.6.2.20000-2
VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU E3113 @ 3.00GHz, disk
1: 80Gbytes, 4096Mbytes RAM

 

7945 firmware - SCCP45.9-2-1S

7970 firmware - SCCP70.9-2-1S

7961G-GE - firmware - SCCP41.9-2-1S

 

I am upgrading to 9-2-3 on all three phones see if that helps.

 

What else am I missing?

 

Somewhat embarrassing but I wanted to reach out to the puck see what
comes back/

 

Next will be to capture packets on the end of the phone..

 

 

TIA J

 

Greg

 

 

 


This message w/attachments (message) is solely for the use of the
intended recipient(s) and may contain information that is privileged,
confidential or proprietary. If you are not an intended recipient,
please notify the sender, and then please delete and destroy all copies
and attachments, and be advised that any review or dissemination of, or
the taking of any action in reliance on, the information contained in or
attached to this message is prohibited. Unless specifically indicated,
this message is not an offer to sell or a solicitation of any products.
--  _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 


This message w/attachments (message) is solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments, and be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited. 
Unless specifically indicated, this message is not an offer to sell or a solicitation of any products.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120202/90a812f4/attachment.html>


More information about the cisco-voip mailing list