[cisco-voip] SIP refer headers Cisco callmanager

[Peter Slow]

on a callmanager you do it like this, i believe...

*http://tinyurl.com/6uz79mw
*
HTH,
-Pete

On Tue, Feb 14, 2012 at 12:06 PM, Leslie Meade
<lmeade at salientnetworks.com>wrote:

> I have a client, that have an IVR that is connected via a SIP trunk.
> If the IVR transfers the call back into the system using a REFER HEADER
> the IVR will get a 404 not found error.
>
> I have setup a sip profile that allows SIP header changes but it will
> still fail. Can anyone give me a pointer where to look for this.
> I know how to do it on an IOS device, but not on a callmanager.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120214/38e4b7a7/attachment.html>