[cisco-voip] jabber client troubleshooting - dial rules

[Lelio Fulgenzi]

... ok, got one step closer. even though I saved the configuration changes, i didn't click Apply. i thought simply closing the app from the task bar would be enough. i've clicked apply and then reloaded the app and now see TFTP activity. but it's getting the old CUPC files, not the new ones I programmed. 

hmmmmm 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
To: cisco-voip at puck.nether.net 
Sent: Friday, February 24, 2012 4:29:43 PM 
Subject: jabber client troubleshooting - dial rules 



OK - So far: 

    • I created a new dial rule XML file and uploaded it to the TFTP server 
    • I restarted the TFTP services 
    • I tested downloading the XML file using a TFTP client and I can get it fine 
    • I configured the iphone jabber client to use the new file 



When I start the client on the iPhone, I see absolutely no activity on the TFTP server (using network capture) 




What gives? Don't these clients have to connect to the TFTP server to download stuff? 






--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120224/ed835079/attachment.html>