[cisco-voip] Help on connecting Remote CME to CUCM Headquarters Please ?

[Ted Nugent]

How are your phones configured (SCCP or SIP), are you using H323 or SIP
dialpeers to CM? What do your inbound dialpeers look like coming into CME
from CM and what does your CUE dialpeer look like? A copy of your config
might also be helpful. This is typically an issue with your inbound
dialpeer and/or a conflict between H323/SIP.


On Mon, Feb 27, 2012 at 9:41 AM, Adewale2 <adewale2 at yahoo.com> wrote:

> Hello ,
>  I can call from Branch  (BR) CME to Phones at Headquarters with CUCM
> 8.5, but   Headquarters (HQ) Office can not call branch (BR) office .
>  I created Dial-peer 1101 on my Branch CME with 9 digit  ( 7045627...  )
> also dial peer on  Headquarters HQ 1 & HQ2.
>  Any Help Please?
> Regards,
> Addy
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120227/709b1c01/attachment.html>