[cisco-voip] Help on connecting Remote CME to CUCM Headquarters Please ?

[ccieid1ot]

No extension dialing between the sites?

On Mon, Feb 27, 2012 at 8:07 AM, Ted Nugent <tednugent73 at gmail.com> wrote:

> How are your phones configured (SCCP or SIP), are you using H323 or SIP
> dialpeers to CM? What do your inbound dialpeers look like coming into CME
> from CM and what does your CUE dialpeer look like? A copy of your config
> might also be helpful. This is typically an issue with your inbound
> dialpeer and/or a conflict between H323/SIP.
>
>
> On Mon, Feb 27, 2012 at 9:41 AM, Adewale2 <adewale2 at yahoo.com> wrote:
>
>> Hello ,
>>  I can call from Branch  (BR) CME to Phones at Headquarters with CUCM
>> 8.5, but   Headquarters (HQ) Office can not call branch (BR) office .
>>  I created Dial-peer 1101 on my Branch CME with 9 digit  ( 7045627...  )
>> also dial peer on  Headquarters HQ 1 & HQ2.
>>  Any Help Please?
>> Regards,
>> Addy
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
duy
CCIE #27737 Voice
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120227/928fe1d0/attachment.html>