[cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems

[Roger Wiklund]

Thanks,

I deleted the application and re-installed it and then it worked (sigh).
Before that I even tried to delete the account, empty cache etc, no go.

I think overall this client is not very stable, I find myself having
to manually shut it down and restart for it to even register.

Thanks,

/Roger

On Mon, Feb 27, 2012 at 10:53 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> i had it working without issue. not sure what could be wrong.
>
> however, that being said, i'm finding quite a bit of issues getting other
> things working.
>
> for one, i was surprised that SIP Digest Authentication uses the local CUCM
> password not the LDAP authentication password. UGH!!!! and there is no way
> for a user to modify this via CCMUser pages! double-UGH!!!!
>
> desktop integration is failing with CTI timeouts. got a TAC case open to try
> to figure that out. it worked for a few minutes today with one successful
> login, but no more.
>
> still haven't tried the connection integration. I'm hoping I can get it
> working with our 7.1(2) ES code.
>
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Roger Wiklund" <roger.wiklund at gmail.com>
> To: "Cisco VOIP" <cisco-voip at puck.nether.net>
> Sent: Monday, February 27, 2012 12:53:32 PM
> Subject: [cisco-voip] Cisco Jabber for iPhone transfer to mobile
> network        problems
>
>
> Has anyone successfully configured so you can transfer a jabber voip
> call to the GSM network?
>
> I have a registered Jabber for iPhone, I can receive in/out calls both
> internally and externally.
> I have configured Mobile Identity with my mobile phone number, so if
> the phone is not registered or no answer the mobile phone rings.
> I have configured partial match with 9 digits in service parameter. I
> have checked that caller ID is matching Mobile Identify.
> I have configured the hand off number
> Device CSS/Rerouting CSS etc is all correct.
> I have followed the steps in the config guide for Jabber.
>
> But still when I press the button to transfer the call to mobile
> network it tried for about 5 seconds then nothing. I can see no
> activity in/out on the gateways.
>
> Any tips?
>
> /Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip