[cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems

[Lelio Fulgenzi]

The other thing I noticed today was that it stopped displaying the external mask on the top status line and started displaying my extension. 

My extension is what I'd like to see, but other than making a number of back and forth changes, no differences in config. I'd really like to know what causes one vs the other to show up. 

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Feb 27, 2012, at 6:59 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> I would have to agree with what I've seen so far. I can't consistently get things to work properly. Including TFTP downloads. We'll have to see how it goes with the next few versions. It is fairly new after all. 
> 
> Sent from my iPhone...
> 
> "There's no place like 127.0.0.1"
> 
> On Feb 27, 2012, at 6:32 PM, Roger Wiklund <roger.wiklund at gmail.com> wrote:
> 
>> Thanks,
>> 
>> I deleted the application and re-installed it and then it worked (sigh).
>> Before that I even tried to delete the account, empty cache etc, no go.
>> 
>> I think overall this client is not very stable, I find myself having
>> to manually shut it down and restart for it to even register.
>> 
>> Thanks,
>> 
>> /Roger
>> 
>> On Mon, Feb 27, 2012 at 10:53 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>> i had it working without issue. not sure what could be wrong.
>>> 
>>> however, that being said, i'm finding quite a bit of issues getting other
>>> things working.
>>> 
>>> for one, i was surprised that SIP Digest Authentication uses the local CUCM
>>> password not the LDAP authentication password. UGH!!!! and there is no way
>>> for a user to modify this via CCMUser pages! double-UGH!!!!
>>> 
>>> desktop integration is failing with CTI timeouts. got a TAC case open to try
>>> to figure that out. it worked for a few minutes today with one successful
>>> login, but no more.
>>> 
>>> still haven't tried the connection integration. I'm hoping I can get it
>>> working with our 7.1(2) ES code.
>>> 
>>> 
>>> 
>>> 
>>> ---
>>> Lelio Fulgenzi, B.A.
>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>>> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Cooking with unix is easy. You just sed it and forget it.
>>>                              - LFJ (with apologies to Mr. Popeil)
>>> 
>>> 
>>> ________________________________
>>> From: "Roger Wiklund" <roger.wiklund at gmail.com>
>>> To: "Cisco VOIP" <cisco-voip at puck.nether.net>
>>> Sent: Monday, February 27, 2012 12:53:32 PM
>>> Subject: [cisco-voip] Cisco Jabber for iPhone transfer to mobile
>>> network        problems
>>> 
>>> 
>>> Has anyone successfully configured so you can transfer a jabber voip
>>> call to the GSM network?
>>> 
>>> I have a registered Jabber for iPhone, I can receive in/out calls both
>>> internally and externally.
>>> I have configured Mobile Identity with my mobile phone number, so if
>>> the phone is not registered or no answer the mobile phone rings.
>>> I have configured partial match with 9 digits in service parameter. I
>>> have checked that caller ID is matching Mobile Identify.
>>> I have configured the hand off number
>>> Device CSS/Rerouting CSS etc is all correct.
>>> I have followed the steps in the config guide for Jabber.
>>> 
>>> But still when I press the button to transfer the call to mobile
>>> network it tried for about 5 seconds then nothing. I can see no
>>> activity in/out on the gateways.
>>> 
>>> Any tips?
>>> 
>>> /Roger
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip