[cisco-voip] Dial-peer restrictions

[Nick Matthews]

If the router is receiving the same digits for both calls, no.

Just need to get creative on the pbx side to create class of service
restrictions so they can only dial different routes, but use
translations to get there.

-nick

On Wed, Jan 4, 2012 at 10:18 AM, Azher Mughal <azher at hep.caltech.edu> wrote:
> Hi All,
>
> I have a setup where asterisk (freepbx) connects via SIP to 2611 router
> for dialing out to pstn via the three fxo ports. However I have two set
> of users. I want to restrict User-A only able to dialout via one of the
> fxo port. While others should be restricted to remaining two ports.
> Router is receiving the called and calling numbers.
>
> Any suggestions on how to implement restrictions ? Router is receiving
> same destination pattern from the users, e.g. 9XXX or 9XXXXXXX. I tried
> to see if freepbx could append a digit for a specific user while dialing
> out, but don't see an option there.
>
> Thanks
> -Azher
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip