[cisco-voip] anyone recall using DickTracy tool?

[Wes Sisk]

it's possible the module is resetting rapidly.  in a packet capture how long does the TCP session stay established?

There were other issues with the 6608 that would cause individual ports to go into reset loops.  there were some debugs you could do from the switch side utilizing control plane from the switch to the module rather than IP plane.  those are covered in the multiservice debug lookup tool if you select 6608/6624:
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080207ec6.shtml

/wes

On Jan 10, 2012, at 10:30 AM, Lelio Fulgenzi wrote:

I'm trying to use the DickTracy tool to fix up CSCsu08180 but I'm immediately getting the following two lines when I try to connect:

*** Attempting Connection...
*** Session Ended ***

I don't think that's normal.

The Networking crew assures me I have complete access to the switch.

Any thoughts?


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120110/0226152d/attachment.html>