[cisco-voip] restart servers after COP files installed on all servers or as each server install is finished?

[Terpreau, Christophe]

Hi, I usually install first on pub then tftp servers then subs. Reboot pub, tftps then subs (one server by CM group so service is still usable during the change)




Best Regards
Christophe Terpreau
AT&T BUSINESS SOLUTIONS
EMEA Voice Team
christophe.terpreau at att.com<mailto:christophe.terpreau at att.com>
+33149417737

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, January 13, 2012 4:35 PM
To: Cisco VOIP
Subject: [cisco-voip] restart servers after COP files installed on all servers or as each server install is finished?

I opened a case with the TAC to get some assistance with respect to installing multiple COP files. They suggested that I install all COP files then proceed with the restart of the cluster. However, they also suggested that I install the COP files on all the servers first and then restart the cluster.

If I have to wait until all the servers have their files installed before rebooting, it's going to be a much longer service interruption since phones won't have a server to connect to once the backups are gone.

I'd rather (if allowed) restart the server after the files are installed.

Also, the instructions say to use the web browser to do the install, is there an option to use the CLI?

Thoughts?



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120113/412fd55e/attachment.html>