[cisco-voip] problems with dead VG224 ports with overhead inter-building wiring

[Lelio Fulgenzi]

I don't have all the details (isn't that always fun) but we seem to have some problems with VG224 ports that are connected via cable plant to another building. This cabling is overhead cabling. We have some pretty fancy lightning arrestors installed but the problems seem to keep happening. Basically the port goes dead, no dial tone, no error tone. 

The units we're using are the 4B1S-300 located here: 

http://www.platt.com/CutSheets/Circa/3b1s.pdf 

Are we using the wrong thing? Is there something better? Different? 

The client has some sensitive usage going on using these lines and these outages are causing some grief to their daily operation. 

Any thoughts would be well received. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120120/7cefe3ab/attachment.html>