[cisco-voip] After upgrade to 8.6.2a one way audio for some calls-No codec selected!

[Peter Slow]

I think what MIke meant was "Check the routing path between the two phones."

-Peter


On Mon, Jan 23, 2012 at 12:41 PM, Mike <mikeeo at msn.com> wrote:

> Your key statement is this:****
>
> ** **
>
> Then, we moved it to another subnet.
> It got registered but not audio in one way!****
>
> ** **
>
> Check your routing path to the CM.****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Anthony Kouloglou
> *Sent:* Monday, January 23, 2012 10:15 AM
> *To:* Nate VanMaren
> *Cc:* cisco-voip at puck-nether.net
> *Subject:* Re: [cisco-voip] After upgrade to 8.6.2a one way audio for
> some calls-No codec selected!****
>
> ** **
>
> Yes!
> Everything seems to be as it supposed to be!
> One Phone got registered at the main site. Worked fine.
> Then, we moved it to another subnet.
> It got registered but not audio in one way!
>
> Can't this ITL/CTL feature/bug be disabled?
>
> On 20-Jan-12 17:26, Nate VanMaren wrote: ****
>
> Are your phones running firmware you expect them to be?****
>
>  ****
>
> *From:* cisco-voip-bounces at puck.nether.net [
> mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
> *On Behalf Of *Anthony Kouloglou
> *Sent:* Friday, January 20, 2012 1:33 AM
> *To:* cisco-voip at puck-nether.net
> *Subject:* [cisco-voip] After upgrade to 8.6.2a one way audio for some
> calls-No codec selected!****
>
>  ****
>
> Hi all,
> here is a tough one!
> I recently upgraded my 6.1 cluster to 8.6.2a.
> Since my Hardware was 7825H3 typically it was not an upgrade rather than a
> fresh install using a usb drive (cisco has this procedure for these type of
> servers)
> The upgrade was smooth for pub and one sub.
> All phones reregistered and upgraded.
> In the main site there are 20 devices (7975, 7961, 7911) and at 2 remote
> sites 2 devices (one at each site).
> After the upgrade:
> all phones in the main site can talk to each other.
> The two remote phones can talk to each other.
> Each of the remote phones when talking to main site have one way audio!
> The remote site does not hear the main site always.
> There is no firewall/NAT  between the sites.
> I noticed that there is no codec selected for the audio stream that has
> the problems and so no transmit (or received packets for the other).
> And i explain: in an active call between the main site and a remote i
> checked the send/received codecs and statistics.
> the main site had g711 as received codec and of course the received
> packets augmented
> but there was none as send codec and of course no packets transmited.
> In the remote site the findings were inversed (no receive codec and no
> receive packets
>
> lease advise
>
> BR
> Anthony****
>
>
>
>
>
> ****
>
>
>
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited. If you
> are not the intended recipient, please contact the sender by reply email
> and destroy all copies of the original message.****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120123/48ec22f2/attachment.html>