[cisco-voip] Manipulate Connected ID on Ip Phone

[ATIENZA, Gonzalo]

Hi Russell,

 

Can you please provide the call flow?

 

Is this CUCM to GW using H323?

 

If that´s the case, could you also please provide the number dialed on the IP Phone?  The digits sent to the GW and exactly what you need the user to see on the display?

 

Cheers.

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Abebe Amare
Sent: Thursday, January 26, 2012 8:37 AM
To: Russell Chaseling
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Manipulate Connected ID on Ip Phone

 

Hi,

You can use translation-profile on the gateway or may be I did not understood your requirement clearly...

Abebe 

On Thu, Jan 26, 2012 at 12:18 PM, Russell Chaseling <rchaseling at plannet21.ie> wrote:

Hi,

 

Anyone know how to do this - need to manipulate the "called" ID of a dialled number on the IP Phone screen after connection.

 

Basically customer has a Vodafone CPN and we need to send them a prefix to connect 12345 which is added on the outgoing dialpeer. 

 

dial-peer voice 20 pots

preference 1

destination-pattern 0087T

port 0/0/1:15

prefix 12345087

 

So when a user dials a Vodafone number it comes up on their IP Phone as dialled number 123450871111111.....the only way I can seem to manipulate it is to Restrict it completely on the route pattern which then shows the dialled number as Unknown - neither solution is good for the customer.

 

Think it can be done by TCL script I believe but looking for a simpler solution

 

Cheers

Russell

 

 

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120126/e7e8bc9b/attachment.html>