[cisco-voip] Manipulate Connected ID on Ip Phone

Abebe Amare abucho at gmail.com
Thu Jan 26 06:37:00 EST 2012


Hi,

You can use translation-profile on the gateway or may be I did not
understood your requirement clearly...

Abebe
On Thu, Jan 26, 2012 at 12:18 PM, Russell Chaseling <rchaseling at plannet21.ie
> wrote:

> Hi,****
>
> ** **
>
> Anyone know how to do this – need to manipulate the “called” ID of a
> dialled number on the IP Phone screen after connection.****
>
> ** **
>
> Basically customer has a Vodafone CPN and we need to send them a prefix to
> connect 12345 which is added on the outgoing dialpeer. ****
>
> ** **
>
> *dial-peer voice 20 pots*
>
> *preference 1*
>
> *destination-pattern 0087T*
>
> *port 0/0/1:15*
>
> *prefix 12345087*
>
> * *
>
> So when a user dials a Vodafone number it comes up on their IP Phone as
> dialled number 123450871111111.....the only way I can seem to manipulate it
> is to Restrict it completely on the route pattern which then shows the
> dialled number as Unknown – neither solution is good for the customer.****
>
> ** **
>
> Think it can be done by TCL script I believe but looking for a simpler
> solution****
>
> ** **
>
> Cheers****
>
> Russell****
>
> ** **
>
> ** **
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120126/eeea0fc3/attachment.html>


More information about the cisco-voip mailing list