[cisco-voip] CME with CUCM.. is that possible ?

Travis Dennis tdennis at DataSourcePro.com
Thu Jan 26 16:39:46 EST 2012


Yes but the last time I checked the SRST and CME for Fallback license costs were the same.  At some point Cisco will figure out that a lot of companies are going to want the better call processing for remote offices  during an outage and raise the cost on CME as SRST.  May have happened already for all that I know.  Don’t quote me on this but if anyone is interested I think Unity Express can also now be put in the mix for fallback at remote sites during an outage and then VMs that were left at the remote sites during an outage sync back to Unity Connection once the WAN has been restored.

Regards,
 
 
Travis L. Dennis
Enterprise Solutions Architect
DataSource Technical Consulting
(770)490-3313 Main
(925)380-8851 Fax
www.DataSourcePro.com


-----Original Message-----
From: Isamar Maia [mailto:isamar at gmail.com] 
Sent: Thursday, January 26, 2012 3:57 PM
To: Travis Dennis
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CME with CUCM.. is that possible ?

Cool.

So you needed to purchase CME license and CUCM for this scenario as well. Is that correct ?

Isamar


2012/1/26 Travis Dennis <tdennis at datasourcepro.com>:
> Currently you can have your choice of SRST or CME on the remote gateway working with CUCM for your failover call processing.  I personally have not used SRST as the failover since using CME became an option.  Much more robust functionality.
>
> Regards,
>
>
> Travis L. Dennis
> Enterprise Solutions Architect
> DataSource Technical Consulting
> (770)490-3313 Main
> (925)380-8851 Fax
> www.DataSourcePro.com
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Isamar Maia
> Sent: Thursday, January 26, 2012 11:28 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CME with CUCM.. is that possible ?
>
> Hi Folks,
>
>
> We have a small remote infrastructure with a dozen of SIP phones with a 2811 gateway.
> They are connected to a central CUCM in the company HQ.
>
> The problem is when the remote link goes down, all the 12 remote phones cannot make calls between them.
>
> I was wondering if I could install CME into the remote 2811 gateway and integrate it with our central CUCM.
>
> Thanks in advance,
> --
> Isamar Maia
> Cel. VIVO SSA:  (55) 71-9146-8575
> Cel. TIM SSA: (55) 71-9185-5264
> Fixo:  (55) 71-4062-8688
> 日本: +81-(0)3-4550-1212
> Skype ID: isamar.maia
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



--
Isamar Maia
Cel. VIVO SSA:  (55) 71-9146-8575
Cel. TIM SSA: (55) 71-9185-5264
Fixo:  (55) 71-4062-8688
日本: +81-(0)3-4550-1212
Skype ID: isamar.maia




More information about the cisco-voip mailing list