[cisco-voip] Configuring a SIP trunk on CM7.x

[Robin Clayton]

Dear All,

A failure on our ISDN30 (E1) circuit this morning has prompted re-discussion of SIP trunks.

How easy is a SIP trunk to configure on a CM7.x server and how does it affect DDI's?

Any info would be appreciated.

Rob




=========================
Robin Clayton

Network Transition Manager
Richard Rose Federation
Richard Rose Central Academy
Victoria Place
Carlisle
Cumbria
CA1 1LY

Tel: 01228 822075
www: www.rrfa.org.uk



--------------------------------------------------------------------------------------------------------------

Important Notice:

This e-mail and any attachment are confidentialand may be privileged
or otherwise protected from disclosure. It is solely intended for the
person(s) named above. If you are not the intended recipient, any
reading, use, disclosure, copying or distribution of all or parts of this
e-mail or associated attachments is strictly prohibited. If you are not
an intended recipient, please notify the sender immediately by
replying to this message or by telephone and delete this e-mail and
any attachments permanently from your system.

The Richard Rose Federation<http://www.rrfa.org.uk>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120706/0ac8e23b/attachment.html>