[cisco-voip] Calls to DS-'s across channelized T1, no calling number at CPE

Jonathan Charles jonvoip at gmail.com
Fri Jul 6 23:43:48 EDT 2012


I am lazy, I would just back to back PRI it...




Jonathan


On Fri, Jul 6, 2012 at 10:01 PM, Southeasttexas Telecom <SETXTelecom at att.net
> wrote:

> He’ll need to change the type on the IAD to FXS as well but isn’t there a
> tie or similar setting that would better match what he is doing (and used
> on both ends)?…….Using Ground start ? I would set it to Wink Start if
> available.****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Friday, July 06, 2012 8:21 PM
> *To:* Joseph Mays
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Calls to DS-'s across channelized T1, no
> calling number at CPE****
>
> ** **
>
> They are set to FXS, they won't send digits... (it is acting like a
> station port...)****
>
> ** **
>
> You will need to set them to FGD or FXO...****
>
> ** **
>
> ds0-group 0 timeslots 1-2 type fgd-eana****
>
> ** **
>
> ** **
>
> ** **
>
> Jonathan****
>
> ** **
>
> On Fri, Jul 6, 2012 at 1:18 PM, Joseph Mays <mays at win.net> wrote:****
>
> I'm configuring an AS5400 to provide a channelized t1 to an IAD2400. 4 of
> the channels on the T1 are being used for a DS0 group across which we want
> the AS5400 to handle voice calls to and from the IAD2400.****
>
>  ****
>
> On the AS5400****
>
>  ****
>
> controller T1 1/0:24
>  framing esf
>  channel-group 0 timeslots 1-20 speed 64
>  loopback network ignore
>  ds0-group 20 timeslots 21-24 type fxs-ground-start
> !
> interface Serial1/0:24:0
>  ip address 216.24.2.5 255.255.255.252
>  no cdp enable
> !
> voice-port 1/0:24:20
> !
> dial-peer voice 248 pots
>  description ATA-8 TEST line 2, WinNETPBX
>  incoming called-number 502567301[1-9]
>  destination-pattern 502567301[1-9]
>  direct-inward-dial
>  port 1/0:24:20
>  forward-digits all****
>
>  ****
>
> On the IAD2400****
>
>  ****
>
> controller T1 0/0
>  mode cas
>  framing esf
>  linecode b8zs
>  channel-group 0 timeslots 1-20 speed 64
>  ds0-group 20 timeslots 21-24 type fxo-ground-start
> !
> interface Serial0/0:0
>  ip address 216.24.2.6 255.255.255.252
> !
> voice-port 0/0:20
> !
> voice-port 2/0
>  station-id number 5025673011
> !
> dial-peer voice 10 pots
>  incoming called-number 5025673011
>  direct-inward-dial
>  port 2/0
>  forward-digits all ****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120706/f48d5a9b/attachment.html>


More information about the cisco-voip mailing list