[cisco-voip] UCCX 7.x Supervisor Monitor calls?

[Roger Wiklund]

Hey

I made a note about how to configure CAD/CSD based recording and
monitoring on my blog. Feel free to check it out.

It's for 8.5 but most of it should apply for 7x.

http://wiklunds.wordpress.com/2012/06/03/uccx-8-5-cadcsd-call-recording-and-silent-monitoring/

/Roger

On Wed, Jul 11, 2012 at 7:18 PM, Madziarczyk, Jonathan
<jmad at cityofevanston.org> wrote:
> In the brief stages of trying to troubleshoot this.  As I think I understood
> it, the supervisor needed to be on a spanning port for the vlan that the
> phones they want to monitor are on?  Or did Cisco have a way around this?
>
>
>
> Jonathan
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>