[cisco-voip] Active Voice Calls OID

[Roger Wiklund]

This works for me.

A snapshot summary of overall call active  statistics on the platform
is given by the cvCallVolConnTotalActiveConnections
(1.3.6.1.4.1.9.9.63.1.3.8.2) OID.

"This object represents the total number of
active call legs in the voice gateway."

So it's gonna be double, but you can easily to a CDEF divide by 2
function in Cacti.

2911 with 15.1(4).M2

/Roger

On Wed, Jul 18, 2012 at 7:21 AM, He-Man <batuk at bilgisayarkurdu.org> wrote:
> Hello again,
>
> Is there any opinion for that issue ?
>
> Thanks,
>
> ________________________________
>
> 17 Temmuz 2012 16:17 tarihinde, He-Man yazdı:
>
> Hello Mr. Matthews,
>
>   I have tried many times with their derivatives, but it hasn't worked. I
> have found IOD, which you sent me below.But it is related with
> CPUTotal5minRev statistics. I think it isn't true for , active calls but, it
> has nearly true but not realtime.
>
> 1.3.6.1.4.1.9.9.109.1.1.1.1.8
>
> Have you got, specific IOD for active calls , whic is related with "sh call
> active voice compact" . I will approve , when the number of active legs
> divided by two. Like, if I send sh call active voice compact  command,
> router says , Total call-legs: 8 but cacti says 4. It is approval for me ,
> no problem.But I didn't have this OID also.
>
> Thanks.
>
> ________________________________
>
>
> 16 Temmuz 2012 17:50 tarihinde, Nick Matthews yazdı:
>
> Physical Chassis: Interface connectivity, CPU and memory
>
> IF-MIB
>
> IfEntry
>
> 1.3.6.1.2.1.2.2.1
>
> CISCO-PROCESS MIB
>
> cpmCPUTotal5minRev
>
> 1.3.6.1.4.1.9.9.109.1.1.1.1.8
>
> CISCO-MEMORY-POOL-MIB
>
> ciscoMemoryPoolEntry
>
> 1.3.6.1.4.1.9.9.48.1.1.1
>
> SIP: Monitor the issues/timeouts that occur with generic SIP signaling
>
> CISCO-SIP-UA-MIB
>
> cSipStats
>
> 1.3.6.1.4.1.9.9.152.1.2
>
> Active calls: Monitor calls on a particular dial peer
>
> DIAL-CONTROL-MIB
>
> dialCtlPeerStatsEntry
>
> 1.3.6.1.2.1.10.21.1.2.2.1
>
> Voice Quality Statistics: Active call stats, e.g. packet loss and
> round-trip time (RTT)
>
> CISCO-VOICE-DIAL-CONTROL-MIB
>
> cvVoIPCallActiveEntry
>
> 1.3.6.1.4.1.9.9.63.1.3.2.1
>
> SIP Trunk utilization: Number of active calls based on protocol,
> dial-peer and interface, Call rate and spike
>
> CISCO-VOICE-DIAL-CONTROL-MIB
>
> cvCallVolume
>
> 1.3.6.1.4.1.9.9.63.1.3.8
>
> cvCallRateMonitor
>
> 1.3.6.1.4.1.9.9.63.1.3.11
>
> DSP utilization: report transcoding and MTP session information,
> configuration and statistics on used/available sessions
>
> CISCO-DSP-MGMT-MIB
>
> cdspDspfarmObjects
>
> 1.3.6.1.4.1.9.9.86.1.6
>
> cdspDspfarmUtilObjects
>
> 1.3.6.1.4.1.9.9.86.1.7
>
>
>
> Root Object Name cvGatewayCallActive, OID: 1.3.6.1.4.9.9.63.1.3
>
>
> Copied from some not-so-friendly sources, apologies for the formatting.
>
> -nick
>
>
>
> On Mon, Jul 16, 2012 at 5:12 AM, He-Man <batuk at bilgisayarkurdu.org> wrote:
>
> Hello,
>
> We are using Cacti for active voice call number from Cisco routers via
> snmp.But our OID numbers are working only for PRI calls. (sh voice call
> status)
>  I would like know ; what is the OID number of "sh call active voice
> compact" command.
>
> Thanks,
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>