[cisco-voip] Active Voice Calls OID

[He-Man]

Hello again,

Is there any opinion for that issue ?

Thanks,

------------------------------------------------------------------------

17 Temmuz 2012 16:17 tarihinde, He-Man yazd?:
> Hello Mr. Matthews,
>
>   I have tried many times with their derivatives, but it hasn't 
> worked. I have found IOD, which you sent me below.But it is related 
> with CPUTotal5minRev statistics. I think it isn't true for , active 
> calls but, it has nearly true but not realtime.
>
> 1.3.6.1.4.1.9.9.109.1.1.1.1.8
>
> Have you got, specific IOD for active calls , whic is related with "sh 
> call active voice compact" . I will approve , when the number of 
> active legs divided by two. Like, if I send sh call active voice 
> compact  command, router says , Total call-legs: 8 but cacti says 4. 
> It is approval for me , no problem.But I didn't have this OID also.
>
> Thanks.
>
> ------------------------------------------------------------------------
>
>
> 16 Temmuz 2012 17:50 tarihinde, Nick Matthews yazd?:
>> Physical Chassis: Interface connectivity, CPU and memory
>>
>> IF-MIB
>>
>> IfEntry
>>
>> 1.3.6.1.2.1.2.2.1
>>
>> CISCO-PROCESS MIB
>>
>> cpmCPUTotal5minRev
>>
>> 1.3.6.1.4.1.9.9.109.1.1.1.1.8
>>
>> CISCO-MEMORY-POOL-MIB
>>
>> ciscoMemoryPoolEntry
>>
>> 1.3.6.1.4.1.9.9.48.1.1.1
>>
>> SIP: Monitor the issues/timeouts that occur with generic SIP signaling
>>
>> CISCO-SIP-UA-MIB
>>
>> cSipStats
>>
>> 1.3.6.1.4.1.9.9.152.1.2
>>
>> Active calls: Monitor calls on a particular dial peer
>>
>> DIAL-CONTROL-MIB
>>
>> dialCtlPeerStatsEntry
>>
>> 1.3.6.1.2.1.10.21.1.2.2.1
>>
>> Voice Quality Statistics: Active call stats, e.g. packet loss and
>> round-trip time (RTT)
>>
>> CISCO-VOICE-DIAL-CONTROL-MIB
>>
>> cvVoIPCallActiveEntry
>>
>> 1.3.6.1.4.1.9.9.63.1.3.2.1
>>
>> SIP Trunk utilization: Number of active calls based on protocol,
>> dial-peer and interface, Call rate and spike
>>
>> CISCO-VOICE-DIAL-CONTROL-MIB
>>
>> cvCallVolume
>>
>> 1.3.6.1.4.1.9.9.63.1.3.8
>>
>> cvCallRateMonitor
>>
>> 1.3.6.1.4.1.9.9.63.1.3.11
>>
>> DSP utilization: report transcoding and MTP session information,
>> configuration and statistics on used/available sessions
>>
>> CISCO-DSP-MGMT-MIB
>>
>> cdspDspfarmObjects
>>
>> 1.3.6.1.4.1.9.9.86.1.6
>>
>> cdspDspfarmUtilObjects
>>
>> 1.3.6.1.4.1.9.9.86.1.7
>>
>>
>>
>> Root Object Name cvGatewayCallActive, OID: 1.3.6.1.4.9.9.63.1.3
>>
>>
>> Copied from some not-so-friendly sources, apologies for the formatting.
>>
>> -nick
>>
>>
>>
>> On Mon, Jul 16, 2012 at 5:12 AM, He-Man<batuk at bilgisayarkurdu.org>  wrote:
>>> Hello,
>>>
>>> We are using Cacti for active voice call number from Cisco routers via snmp.But our OID numbers are working only for PRI calls. (sh voice call status)
>>>   I would like know ; what is the OID number of "sh call active voice compact" command.
>>>
>>> Thanks,
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120718/0acfce3f/attachment.html>