[cisco-voip] Active Voice Calls OID

[He-Man]

Hello Mr. Matthews,

   I have tried many times with their derivatives, but it hasn't worked. 
I have found IOD, which you sent me below.But it is related with 
CPUTotal5minRev statistics. I think it isn't true for , active calls 
but, it has nearly true but not realtime.

1.3.6.1.4.1.9.9.109.1.1.1.1.8

Have you got, specific IOD for active calls , whic is related with "sh 
call active voice compact" . I will approve , when the number of active 
legs divided by two. Like, if I send sh call active voice compact  
command, router says , Total call-legs: 8 but cacti says 4. It is 
approval for me , no problem.But I didn't have this OID also.

Thanks.

------------------------------------------------------------------------


16 Temmuz 2012 17:50 tarihinde, Nick Matthews yazd?:
> Physical Chassis: Interface connectivity, CPU and memory
>
> IF-MIB
>
> IfEntry
>
> 1.3.6.1.2.1.2.2.1
>
> CISCO-PROCESS MIB
>
> cpmCPUTotal5minRev
>
> 1.3.6.1.4.1.9.9.109.1.1.1.1.8
>
> CISCO-MEMORY-POOL-MIB
>
> ciscoMemoryPoolEntry
>
> 1.3.6.1.4.1.9.9.48.1.1.1
>
> SIP: Monitor the issues/timeouts that occur with generic SIP signaling
>
> CISCO-SIP-UA-MIB
>
> cSipStats
>
> 1.3.6.1.4.1.9.9.152.1.2
>
> Active calls: Monitor calls on a particular dial peer
>
> DIAL-CONTROL-MIB
>
> dialCtlPeerStatsEntry
>
> 1.3.6.1.2.1.10.21.1.2.2.1
>
> Voice Quality Statistics: Active call stats, e.g. packet loss and
> round-trip time (RTT)
>
> CISCO-VOICE-DIAL-CONTROL-MIB
>
> cvVoIPCallActiveEntry
>
> 1.3.6.1.4.1.9.9.63.1.3.2.1
>
> SIP Trunk utilization: Number of active calls based on protocol,
> dial-peer and interface, Call rate and spike
>
> CISCO-VOICE-DIAL-CONTROL-MIB
>
> cvCallVolume
>
> 1.3.6.1.4.1.9.9.63.1.3.8
>
> cvCallRateMonitor
>
> 1.3.6.1.4.1.9.9.63.1.3.11
>
> DSP utilization: report transcoding and MTP session information,
> configuration and statistics on used/available sessions
>
> CISCO-DSP-MGMT-MIB
>
> cdspDspfarmObjects
>
> 1.3.6.1.4.1.9.9.86.1.6
>
> cdspDspfarmUtilObjects
>
> 1.3.6.1.4.1.9.9.86.1.7
>
>
>
> Root Object Name cvGatewayCallActive, OID: 1.3.6.1.4.9.9.63.1.3
>
>
> Copied from some not-so-friendly sources, apologies for the formatting.
>
> -nick
>
>
>
> On Mon, Jul 16, 2012 at 5:12 AM, He-Man<batuk at bilgisayarkurdu.org>  wrote:
>> Hello,
>>
>> We are using Cacti for active voice call number from Cisco routers via snmp.But our OID numbers are working only for PRI calls. (sh voice call status)
>>   I would like know ; what is the OID number of "sh call active voice compact" command.
>>
>> Thanks,
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120717/6b15c09f/attachment.html>