[cisco-voip] Unified Provisioning Manager on CUCM-BE 6K

[Paul]

if you're using any UNIX variant and you're scared of EMACS and vi/vim... 'nano -w' is your friend....or it's twin 'pico -w'


----- Original Message -----
From: Jason Gurtz <jasongurtz at npumail.com>
To: cisco-voip at puck.nether.net
Cc: 
Sent: Tuesday, June 12, 2012 9:48 AM
Subject: Re: [cisco-voip] Unified Provisioning Manager on CUCM-BE 6K

Yes, the good old vi, or maybe the slightly more friendly vim is
available. However, the joe editor is often available which is pretty
similar to edit under DOS.

My suggestion for learning vi editor: download and install gvim for the PC
from vim.org. Once installed find the vimtutor link in the start menu.

In 30 minutes or so you will be comfortable enough to do basic editing in
it. :) Actually, after that you might be pissed every time notepad opens
:)

~JasonG

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Nick
> Sent: Tuesday, June 12, 2012 07:42
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Unified Provisioning Manager on CUCM-BE 6K
> 
> Hi All
> 
> 
> 
> Has anyone installed the CUPM Provisioning Manager on CUCMBE6K in
VMware,
> this appears to be the only Linux version available and the docs are not
> great as I do not know Linux can anyone help me with the following for
> configuring the network parameters, especially step 2, 3 and 4, I'm not
> sure how to do this and it doesn't explain how
> 
> 
> 
> Configuring the Network Parameters
> 
> To configure the network parameters:
> 
> ________________________________
> 
> Step 1 Open an SSH terminal and login using root/Cisco at 123.
> 
> 
> ________________________________
> 
> Warning You must change your root password using the passwd command
after
> the installation process. Also, make a note of the initial root password
> (Cisco at 123) as it may be required to perform OS tasks in future.
> 
> ________________________________
> 
> 
> 
> Step 2 Open the file /etc/sysconfig/network-scripts/ifcfg-eth0 and
update
> the device MAC Address, IP Address, and netmask.
> 
> Step 3 Open the file /etc/sysconfig/network and update the server
> hostname and gateway address.
> 
> Step 4 Open the file /etc/hosts and add the IP and hostname mapping
> details at the bottom.
> 
> Step 5 Run the following command from the command prompt:
> 
> hostname XXXX
> 
> where XXXX is the hostname of the server.
> 
> Step 6 Run the following command to apply the network configuration
> changes:
> 
> service network restart
> 
> Step 7 Run the following commands to make all changes permanent:
> 
> /opt/system/bin/carssh -s /opt/system/etc/carscli/default/main_tree.par
-
> c write mem
> 
> Step 8 Shut down the VM instance.
> 
> Step 9 Power off and then power on the VM instance from VSphereClient.
To
> do this, choose Inventory > Virtual Machine > Power.
> 
> 
> 
> Regards
> 
> Nick

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip