[cisco-voip] 9.3.1 Firmware is out for 8961/99X1 Phones

[Ovidiu Popa]

Did you try the workaround in  CSCtx41256?

Also, see if clearing the call history improves the response time
and/or reduces the dropped digits...

Regards,
Ovidiu

On Thu, Jun 21, 2012 at 5:03 PM, Erich Novak <Erich.Novak at nts.eu> wrote:
>
> I really hope that the phones will be a bit more responsive with 9.3...
>
> customer complaints about lagging phones, dropped keypresses and hung phones are a pita since 9.2 onwards should not happen with top of the line phones in my oppinion.
>
> but 9.2.4 was the first step in the right direction...
>
> brgds
> Erich
> ________________________________
> Von: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net]" im Auftrag von "Lelio Fulgenzi [lelio at uoguelph.ca]
> Gesendet: Donnerstag, 21. Juni 2012 16:38
> An: Ryan Ratliff
> Cc: Cisco VOIP
> Betreff: Re: [cisco-voip] 9.3.1 Firmware is out for 8961/99X1 Phones
>
> That's great Ryan. Separating them out like that will really help.
>
> Also, for us non-partners, here's the URL without the partner directory:
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/9_3_1/release_notes/P567_BK_RCEC20BC_00_rn-9_3_1-8961-9951-9971.html
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Ryan Ratliff" <rratliff at cisco.com>
> To: "Matthew Loraditch" <MLoraditch at heliontechnologies.com>
> Cc: "Cisco VOIP" <cisco-voip at puck.nether.net>
> Sent: Thursday, June 21, 2012 10:35:16 AM
> Subject: Re: [cisco-voip] 9.3.1 Firmware is out for 8961/99X1 Phones
>
> For folks reading this take note of the two sections of new and changed features.  We usually get lots of customers asking why they can't use a given feature because the devpack isn't out yet that enables the UCM side of the feature.  Hopefully this breakdown will clarify which features will work out of the box and which you need to update UCM for.
>
> There is also a new device pack compatibility matrix to help you see when the devpack that goes with each phone firmware will be available (or if it is).  Note this hasn't caught up to the 9.3(1) releases yet.
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html
>
>
> -Ryan
>
> On Jun 21, 2012, at 9:17 AM, Matthew Loraditch wrote:
>
> http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/9_3_1/release_notes/P567_BK_RCEC20BC_00_rn-9_3_1-8961-9951-9971.html
> Many changes and enhancements, the team was really excited about this release at Cisco Live
>
>
> Matthew G. Loraditch – CCNP-Voice, CCNA, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> voice. 410.252.8830
> fax.  410.252.9284
>
> Twitter  |  Facebook  | Website  |  Email Support
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>