[cisco-voip] Bogen UTI1 + ATA187

[Tim Frazee]

Yes, we had this problem. It's a problem where the ats doesn't see the supervisory signal to let go of the call. We opened a case months ago and Cisco made some changes to how the busy tone is configured.

What rev of ucm and phone load?

-tim

On Jun 27, 2012, at 11:17 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com> wrote:

> Anyone ever had this connection where you get a busy signal on the paging system for 30-60 seconds after hanging up the phone? I’m thinking it’s a setting on the bogen, but am not onsite with my tech and don’t usually handle the bogen side.
> Thx!
>  
> Matthew G. Loraditch – CCNP-Voice, CCNA, CCDA
> 
> 1965 Greenspring Drive
> Timonium, MD 21093
> 
> voice. 410.252.8830
> fax.  410.252.9284    
> 
> Twitter  |  Facebook  | Website  |  Email Support
>  
> 
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120628/cde8b457/attachment.html>