[cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems

[Lelio Fulgenzi]

Believe it or not, the act of simply installing fresh likely fixed things. I've found that making changes is being troublesome. I've had to reinstall on a few occasions. 

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Mar 3, 2012, at 6:33 AM, Roger Wiklund <roger.wiklund at gmail.com> wrote:

> Cisco released 8.6.4 yesterday and now transfer to mobile network
> works for me! (With the mobility softkey)
> However there is no info in fixed bugs regarding transfer to mobile.
> 
> /Roger
> 
> On Tue, Feb 28, 2012 at 6:24 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>> Yes - I used the mobility softkey option working. Didn't do anything special
>> except follow the instructions in the document. Two or three times over to
>> ensure I did things correctly. ;)
>> 
>> Right now I'm working on getting Desktop integration working, might be a bug
>> though.
>> 
>> 
>> 
>> 
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)
>> 
>> 
>> ________________________________
>> From: "Roger Wiklund" <roger.wiklund at gmail.com>
>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
>> Cc: "Cisco VOIP" <cisco-voip at puck.nether.net>
>> Sent: Tuesday, February 28, 2012 6:57:38 AM
>> Subject: Re: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network
>> problems
>> 
>> 
>> Alessandro - It should work, do you mean that Jabber for iPhone does
>> not work at all or do you mean transfer to GSM?
>> 
>> Lelio - did you manage to get transfter to mobile network working by
>> using mobility softkey?
>> I'm going crazy, I have tried everything, nothing works. But
>> mobility/transfer to mobile works from my CIPC.
>> 
>> I can get transfer to mobile network using handoff DN but I don't want
>> that because I'm using MGCP GWs.
>> 
>> Thanks,
>> Regards
>> 
>> On Tue, Feb 28, 2012 at 11:22 AM, kpyib at tin.it <kpyib at tin.it> wrote:
>>> Hi Roger,
>>>    I've also installed Cisco Jabber for ipHone version 8.6.3, but can't
>>> make
>>> it work with CUCM 8.6.1a.
>>> 
>>> 
>>> Do you can confirm that Jabber for iPhone work only with CUCM 8.6.2a?
>>> 
>>> Cisco Jabber for Android 8.6.4.1434 works fine also with CUCM 8.6.1a.
>>> 
>>> 
>>> 
>>> Thank you
>>> 
>>> Can you confirm that?
>>> 
>>> 
>>> 
>>> Regards
>>> 
>>> Alessandro Bertacco
>>> 
>>> ----Messaggio originale----
>>> Da: roger.wiklund at gmail.com
>>> Data: 27-feb-2012 18.53
>>> A: "Cisco VOIP"<cisco-voip at puck.nether.net>
>>> Ogg: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network
>>> problems
>>> 
>>> 
>>> Has anyone successfully configured so you can transfer a jabber voip
>>> call to the GSM network?
>>> 
>>> I have a registered Jabber for iPhone, I can receive in/out calls both
>>> internally and externally.
>>> I have configured Mobile Identity with my mobile phone number, so if
>>> the phone is not registered or no answer the mobile phone rings.
>>> I have configured partial match with 9 digits in service parameter. I
>>> have checked that caller ID is matching Mobile Identify.
>>> I have configured the hand off number
>>> Device CSS/Rerouting CSS etc is all correct.
>>> I have followed the steps in the config guide for Jabber.
>>> 
>>> But still when I press the button to transfer the call to mobile
>>> network it tried for about 5 seconds then nothing. I can see no
>>> activity in/out on the gateways.
>>> 
>>> Any tips?
>>> 
>>> /Roger
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>> 
>>>