[cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems

[Roger Wiklund]

Cisco released 8.6.4 yesterday and now transfer to mobile network
works for me! (With the mobility softkey)
However there is no info in fixed bugs regarding transfer to mobile.

/Roger

On Tue, Feb 28, 2012 at 6:24 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> Yes - I used the mobility softkey option working. Didn't do anything special
> except follow the instructions in the document. Two or three times over to
> ensure I did things correctly. ;)
>
> Right now I'm working on getting Desktop integration working, might be a bug
> though.
>
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Roger Wiklund" <roger.wiklund at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "Cisco VOIP" <cisco-voip at puck.nether.net>
> Sent: Tuesday, February 28, 2012 6:57:38 AM
> Subject: Re: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network
> problems
>
>
> Alessandro - It should work, do you mean that Jabber for iPhone does
> not work at all or do you mean transfer to GSM?
>
> Lelio - did you manage to get transfter to mobile network working by
> using mobility softkey?
> I'm going crazy, I have tried everything, nothing works. But
> mobility/transfer to mobile works from my CIPC.
>
> I can get transfer to mobile network using handoff DN but I don't want
> that because I'm using MGCP GWs.
>
> Thanks,
> Regards
>
> On Tue, Feb 28, 2012 at 11:22 AM, kpyib at tin.it <kpyib at tin.it> wrote:
>> Hi Roger,
>>    I've also installed Cisco Jabber for ipHone version 8.6.3, but can't
>> make
>> it work with CUCM 8.6.1a.
>>
>>
>> Do you can confirm that Jabber for iPhone work only with CUCM 8.6.2a?
>>
>> Cisco Jabber for Android 8.6.4.1434 works fine also with CUCM 8.6.1a.
>>
>>
>>
>> Thank you
>>
>> Can you confirm that?
>>
>>
>>
>> Regards
>>
>> Alessandro Bertacco
>>
>> ----Messaggio originale----
>> Da: roger.wiklund at gmail.com
>> Data: 27-feb-2012 18.53
>> A: "Cisco VOIP"<cisco-voip at puck.nether.net>
>> Ogg: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network
>> problems
>>
>>
>> Has anyone successfully configured so you can transfer a jabber voip
>> call to the GSM network?
>>
>> I have a registered Jabber for iPhone, I can receive in/out calls both
>> internally and externally.
>> I have configured Mobile Identity with my mobile phone number, so if
>> the phone is not registered or no answer the mobile phone rings.
>> I have configured partial match with 9 digits in service parameter. I
>> have checked that caller ID is matching Mobile Identify.
>> I have configured the hand off number
>> Device CSS/Rerouting CSS etc is all correct.
>> I have followed the steps in the config guide for Jabber.
>>
>> But still when I press the button to transfer the call to mobile
>> network it tried for about 5 seconds then nothing. I can see no
>> activity in/out on the gateways.
>>
>> Any tips?
>>
>> /Roger
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>